Photoset #19275 - DIY Preparation and Finishing of Hand-Hewn Mantel - Vineyard, Utah

Hand-Hewn White Ash mantel - Cut on back and top side - ends squared
Photo #79821
Hand-Hewn White Ash mantel - Cut on back and top side - ends squared
Hand-Hewn White Ash mantel - Cut on back and top side - ends squared
Photo #79822
Hand-Hewn White Ash mantel - Cut on back and top side - ends squared
Hand-Hewn White Ash mantel - Cut on back and top side - ends squared
Photo #79823
Hand-Hewn White Ash mantel - Cut on back and top side - ends squared
Lightly back chisled and Brush sanded on the Hand-Hewn sides
Photo #79824
Lightly back chisled and Brush sanded on the Hand-Hewn sides
Brush sanded on the Hand-Hewn sides
Photo #79829
Brush sanded on the Hand-Hewn sides
Belt sanding the cut faces
Photo #79825
Belt sanding the cut faces
Belt sanding the cut faces
Photo #79826
Belt sanding the cut faces
Belt sanding the cut faces
Photo #79827
Belt sanding the cut faces
Belt sanding the cut faces
Photo #79828
Belt sanding the cut faces
Clear Epoxy fill in checks/cracks
Photo #79831
Clear Epoxy fill in checks/cracks
Clear Epoxy fill in checks/cracks
Photo #79832
Clear Epoxy fill in checks/cracks
Clear Epoxy fill in checks/cracks
Photo #79833
Clear Epoxy fill in checks/cracks
Cut faces progressively sanded with orbital sander to final 220 grit
Photo #79834
Cut faces progressively sanded with orbital sander to final 220 grit
Cut faces progressively sanded with orbital sander to final 220 grit
Photo #79835
Cut faces progressively sanded with orbital sander to final 220 grit
Mixing stain for cut sides that will blend with clear Polyurithane/Tung Oil mix finish on H-H faces - Tested on back (hidden side)
Photo #79830
Mixing stain for cut sides that will blend with clear Polyurithane/Tung Oil mix finish on H-H faces - Tested on back (hidden side)
finished mantel ready for installation
Photo #79836
finished mantel ready for installation

Related Product Pages

Hand-Hewn Finished Mantels
Hand-Hewn