Douglas Fir Classic Smooth T&G Flooring
Douglas Fir Classic Smooth T&G Flooring
Specification Sheet #2002 - Douglas Fir Classic T&G Flooring
Request Quote
Height
Width
Length
Quantity
0.72"
Rand 3-4.75-6.5"
Rand 2-10'
min: 250 sf
Related Productline Pages
Classic Douglas Fir Smooth T&G Flooring
Specification Sheet #2002 - Douglas Fir Classic T&G Flooring
Species
Douglas Fir
Source
Various reclaimed wood projects
Flooring Type
Solid Wood, Unfinished
Profile
Tongue and Groove (T&G)
Knots
1 tight knot (1" or under) every 1 square foot allowed (on a 1x6 board, this would translate into 1 tight knot every 2 linear feet); larger knots in lower frequency allowed (for example, a 2" knot in 2 square feet that is otherwise clear would be allowed); 2" maximum knot size; knots can be broken, loose or fallen out
Holes
Occasional random nail holes and bolt holes; some staining around the nail holes and bolt holes or on the face is allowable
Checking/Cracks
Moderate amounts of surface checking allowed; no cracks
Grain Pattern
Moderately tight grain; vertical, flat or mixed
Standard Dimensions
a) Thickness: 3/4"; b) Width: Varies, depending on Douglas Fir Classic Millwork Stock available at time of order; typical Classic flooring widths can be expected to be 3" to 7"; wider (and/or narrower) Classic flooring may be available at any given time; and c) Length: 1 to 10'.
Textures Available
Smooth, Wire-Brush and Circle-Sawn
Appearance Variation
Boards can vary in appearance from piece to piece and even within a piece. The characteristics described on this specification sheet generally apply to each board's featured face. The opposite face and edges can differ from the featured face in texture, coloring, and other characteristics unless otherwise noted.