Antique Oak Band-Sawn KD Lumber
Antique Oak Band-Sawn KD Lumber
Specification Sheet #6211 - Reclaimed Oak Millwork Stock
Request Quote
Height
Width
Length
Quantity
1"
3-8"
Rand 2-8'
min: 250 bf
Related Productline Pages
Antique Oak - Resawn
Specification Sheet #6211 - Reclaimed Oak Millwork Stock
Species
Oak (White Oak and Red Oak mixed)
Source
Barns, corncribs, stables, mills, homes and other buildings and agricultural/industrial/construction structures and materials from different locations in North America
Holes
Nails and other fasteners are removed, leaving occasional nail holes. Staining around nail and fastener holes is common.
Knots
Unlimited; some knots are broken, loose or fallen out
Checking/Cracks
Surface checking is allowed; some cracking is allowed as long as board is sound.
Grain Pattern
Mixed
Moisture Content/Stability
Kiln-Dried: Reclaimed Oak Millwork Stock is cut from stock which is generally very dry and seasoned and is then kiln-dried. The resulting lumber is much more stable and less prone to shrinkage than is green lumber.
Standard Dimensions
a) Thickness (net): 4/4"; b) Standard Width: Random, 3" to 6"; most common widths are 5" and 6"; material is edged to 1/2" under listed width; wider boards (7 to 10"+) are available (please request quote); and c) Length: 1' increments up to 16'.
Weight
Typically, approximately 4 pounds per board foot
Surfacing
Band-Sawn. Weathered Reclaimed Oak will have at least one weathered face.
Color/Appearance
Some boards are more rustic than others; in general, boards have a nice aged appearance, with checking, knots, nail holes, stain, some water-stain, etc. (all in varying degrees).
Appearance Variation
Boards can vary in appearance from piece to piece and even within a piece. The characteristics described on this specification sheet generally apply to each board's featured face. The opposite face and edges can differ from the featured face in texture, coloring, and other characteristics unless otherwise noted.